Nghiên Cứu Y Học
EFFECTIVENESS OF HAND - OPERATED AND ROTARY PROTAPER(r) INSTRUMENTS IN ROOT CANAL PREPARATION.
Bấm tải bài viết
Tạp chí Y học Thành phố Hồ Chí Minh,
14(1):298. DOI
Lượt xem: 272 Lượt tải PDF:
10
Tác giả
Đặng Vũ Thảo Vy(1), Đinh Thị Khánh Vân(2), Phạm Văn Khoa(2)
Tóm tắt
Mở đầu: làm sạch và tạo dạng ống tủy là một giai đoạn quan trọng, góp phần quyết định sự thành công của điều trị nội nha.
Mục tiêu: nghiên cứu này tiến hành so sánh hiệu quả của trâm ProTaper quay tay và trâm ProTaper quay máy trong sửa soạn ống tủy về sự thay đổi độ cong ống tủy, thay đổi chiều dài làm việc, hình dạng ống tủy cắt ngang ở mức phần ba chóp và thời gian sửa soạn.
Phương pháp: đây là nghiên cứu thử nghiệm in vitro với đối tượng là 30 răng cối nhỏ hàm dưới, được chia ngẫu nhiên thành 2 nhóm và kiểm tra lại bằng kiểm định t cho hai mẫu độc lập để đảm bảo không có sự khác biệt giữa 2 nhóm về độ cong ống tủy và chiều dài làm việc. Các răng sau đó được sửa soạn theo kỹ thuật hướng dẫn bởi nhà sản xuất với nhóm I sửa soạn bằng trâm ProTaper quay tay, nhóm II sửa soạn bằng trâm ProTaper quay máy. Đánh giá sự thay đổi độ cong ống tủy và chiều dài làm việc dựa trên phim tia X chụp mẫu răng trước và sau khi sửa soạn. Các răng sau khi sửa soạn được cắt ngang tại mức cách chóp 3 mm để đánh giá hình dạng ống tủy cắt ngang ở phần ba chóp. Thời gian sửa soạn ghi nhận bằng đồng hồ bấm giây. Các số liệu của nghiên cứu được xử lý thống kê bằng phần mềm SPSS 16.0 for Windows với các phép kiểm định t cho hai mẫu độc lập, t bắt cặp và chi bình phương.
Kết quả: nghiên cứu cho thấy trâm ProTaper quay máy sửa soạn ống tủy nhanh và duy trì độ cong ống tủy ban đầu tốt hơn trâm ProTaper quay tay (P < 0,05). Cả 2 loại trâm này đều duy trì tốt chiều dài làm việc và tạo đa số ống tủy có dạng tròn như nhau ở mức phần ba chóp (P > 0,05).
Kết luận: trong điều kiện của nghiên cứu này, cả 2 loại dụng cụ có hiệu quả tương đương nhau trong việc sửa soạn ống tủy và đều an toàn khi sử dụng. Tuy nhiên, trâm ProTaper quay máy duy trì độ cong ống tủy ban đầu tốt hơn trâm ProTaper quay tay.
Abstract
Background: cleaning and shaping root canals is an important step and has an essential pline-height:1.75art to determine the success of endodontic therapy.
Objectives: this study was designed to compare in vitro hand-operated and rotary ProTaper(r) instruments in regard to 4 parameters of root canal preparation: the alteration of canal curvature, the change of working length, the shape of postoperative root canal cross - section in the apical third and the working time.
Materials and method: a total of 30 extracted mandibular premolars were randomly divided into 2 groups of 15 teeth each. Based on radiographs taken prior to instrumentation with the initial instrument inserted into the canal, the 2 groups were balanced with respect to the angle of canal curvature and working length. Canals were prepared using a crown- down preparation technique as instructed by the manufacturer. Group 1 was prepared by hand-operated ProTaper(r) and group 2 was prepared by rotary ProTaper(r). The assessment of changes of canal cuvature and working length was based on radiographs taken prior and post instrumentation. Postoperative root canals were cross - sectioned at 3mm from the foramen for shape evaluation. The time required for canal preparation was recorded for each specimen. Data was statistically analysed using the Independent-samples T test, the Paired-samples t test and the Chi-square test.
Results: rotary ProTaper(r) maintained the original canal curvature better than hand - operated ProTaper(r) (P<0.05). There were no significant differences in maintaining initial working length (P>0.05) and shaping root canal at the apical third (P>0.05). Root canal preparation was significantly faster with rotary ProTaper(r) than hand-operated ProTaper(r) (P<0.001). Conclusion: under the conditions of this in vitro study, both instruments were equally effective in preparing root canals and safe to use. Rotary ProTaper(r) respected original canal curvature better than hand-operated ProTaper(r).